CushionGuide

A Reading by CallumChaise Lounge & Sunbed Cushions

A two-fabric sunbed cushion for long afternoons beside an above-ground pool

No patio, no paving, just a lawn, a steel lounger and a pool with a ladder. The cushion does the rest, and the way its two fabrics are split is what makes it good for a long sit.

The quick answer

For a sunbed cushion you'll sit on for hours, split the fabrics: print on the backrest, a plain matching color on the seat. The seat takes wet swimsuits and sunscreen, so the solid hides wear while the print stays upright where you see it. Keep it slim on a light steel lounger, and a long pool bench cushion can still be one flexible piece.

Two-fabric cushion with orange and cream leaf-print back and solid orange seat on a steel lounger by an above-ground poolSave
An orange leaf-print back paired with a solid orange seat on a steel lounger beside an above-ground pool. The bright color lifts a gray frame and a gray house.

Pinned by Callum: leaf print, plain seat, ladder, hose and steel

Five pins run from the printed backrest down to the steel frame, and each one has something to say about spending a whole afternoon out here.

Pinned: Two-fabric cushion with orange and cream leaf-print back and solid orange seat on a steel lounger by an above-ground pool
  1. Leaf-print backrest

    A cream palm-leaf print on orange brings a holiday feel to a plain back garden.

  2. Solid orange seat

    The plain seat matches the print's ground, so the two parts look like one set.

  3. Pool ladder

    An above-ground pool gets its own sunbed without any paving.

  4. Garden hose

    Everyday details keep the scene real: a family backyard, not a resort.

  5. Steel-tube frame

    Gray steel is neutral, so the bold orange cushion carries all the color.

  1. Leaf-print backrestA cream palm-leaf print on orange brings a holiday feel to a plain back garden.
  2. Solid orange seatThe plain seat matches the print's ground, so the two parts look like one set.
  3. Pool ladderAn above-ground pool gets its own sunbed without any paving.
  4. Garden hoseEveryday details keep the scene real: a family backyard, not a resort.
  5. Steel-tube frameGray steel is neutral, so the bold orange cushion carries all the color.

Why the leaves stay on the backrest

Everything in this backyard is gray or green. Gray siding, a gray steel frame, a gray pool wall, chain-link and mown grass. Somebody had to bring the sun, and burnt orange outdoor acrylic is about as sunny as a fabric gets.

Look where the print went. Cream palm leaves sit on the backrest, upright, right where your eye lands when you step out the back door. The seat is a solid burnt orange cut to match the print's ground, so the two parts read as one set, not two cushions that met at a yard sale.

That split is a comfort call as much as a looks call. The seat is where wet swimsuits, sunscreen and a dripping towel land. A plain color forgives all three. The backrest only has to hold your shoulders and your paperback.

Made for the long sit, not the quick dry-off

A lounger you use for ten minutes after a swim can get by with a thin pad. One you read on all afternoon needs a backrest that rises with the frame and a seat that stays put at the hinge. This is a seat-and-backrest cushion in two sections that follow the steel hinge, with a box edge and self piping in the same orange.

It's slim, and that's right for this frame. A light steel-tube lounger gets dragged across the lawn to chase the sun, and the cushion gets carried in when the sky turns. Rain doesn't negotiate.

The props keep it honest. The pool ladder and the little timber step deck say there's no paving here, only grass, and the lounger still becomes the spot everyone wants. The hose coiled on the siding says family backyard, not resort. You'll find other frames in chaise and sunbed cushions, more setups in patio and porch cushions, and the cloth itself in outdoor acrylic.

What do you do longest on yours, friend: read, nap or keep an eye on the kids in the water?

A real project

One cushion, two or five? A 118 in pool bench

One buyer wrote in about a poolside bench that seats five, 118 x 20 in (300 x 50 cm). They wanted it thick and waterproof, 5 in (13 cm), and couldn't decide between one long cushion, two pieces split three seats and two, or five separate pads.

The workshop's answer turned on storage, not looks. One long piece can be folded or rolled for the off-season without creasing or damage, because the foam is flexible. Production was quoted at 3-5 days, with 3-5 days of shipping after that.

So choose by the shed, not the bench. If you have a shelf for a roll, one piece gives a long, gap-free seat for anybody stretching out. If you need to hand a cushion to five people at once, cut five. There's more in one piece or two and in our winter storage notes.

On the cutting table: the orange lawn lounger

ProductChaise and sunbed cushion, seat and backrest in two sections
EdgeBox edge, slim profile
FabricOutdoor acrylic (M-23)
BackrestCream palm-leaf print on burnt orange
SeatSolid burnt orange matched to the print's ground
PipingSelf piping in orange
FrameGray steel-tube lounger, light enough to move
StorageFlexible foam folds or rolls for the off-season
Best forLawn pools, reading and long afternoons in full sun

Order this cushion

Have it made

Have this made — ask Callum’s workshop

Tell them where it lives. Porch, deck or boat: the weather picks the fabric and the foam before anyone else does. — Callum

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
Outdoor acrylic (M-23)
Foam
Flexible foam folds or rolls for the off-season
Piping
Self piping in orange
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

Buyer questions: a floor cushion, boat velcro and a U-shaped van seat

  1. A common question

    Could you make a Japanese-style floor cushion for outdoors, in white Sunbrella, with the zipper along the long side?

    The workshop's answer

    Yes. A custom outdoor floor cushion, for example 32.25 x 44 in (82 x 112 cm), can be made in a white outdoor fabric from the workshop's own charts (it doesn't stock Sunbrella) with the zipper along the 44 in side. The zippered outdoor version is made without tufting, but send a photo of the edge you want, such as French seams or hand-finished sides, and the workshop will copy it.

  2. A common question

    My boat cushions already have hook velcro on them. Can new covers be made to line up with it?

    The workshop's answer

    Yes. Send the exact length, width and thickness of each cushion, and fitted covers are made with the soft loop side sewn to the bottom to meet the hook strips you have. Photos and a simple sketch showing where the strips sit help everything line up.

  3. A common question

    We have U-shaped seating in our campervan. Can you make new seat cushions for it?

    The workshop's answer

    Yes, U-shaped seating is made regularly. Send a drawing with every run of the U, the depth and the thickness you want, plus a photo of the space.

A two-fabric sunbed cushion puts the print on the backrest and a plain matching color on the seat, where wet swimsuits and sunscreen land first.

Callum

Questions buyers ask next

Why put a print on the back of a lounger cushion and a solid on the seat?

The seat takes the wet swimsuits, sunscreen and most of the sitting, so a plain color hides wear. Matching that solid to the print's ground keeps the two sections reading as one set, and the print stays upright where the eye lands.

Can a long outdoor bench cushion be stored folded over winter?

Yes. A 118 x 20 in (300 x 50 cm) pool bench cushion was made as one piece because its flexible foam can be folded or rolled for storage without creasing or damage. Choose one piece, two, or one per seat by the storage space you have.

What should I measure for a two-part chaise lounge cushion?

Measure the seat section and the backrest section separately, each from the hinge to its end, then the width across the frame and the thickness you want. A photo of the lounger with the tape in the shot shows where the hinge falls.

Fair winds — Callum