CushionGuide
Three sun lounger cushions with coral, aqua and gray striped backrests and solid seats beside a sandstone pool terraceSave
  1. Coral stripe backrest

    The stripe goes on the upright part so it reads like a headboard from the house.

  2. Child-size aqua lounger

    A shorter frame gets its own cushion cut to size rather than a folded adult one.

  3. Solid gray seat

    A plain seat in the stripe's darker color hides sun-cream marks and wear.

  4. Wet paving

    Swimmers drip here, which is why an outdoor membrane fabric was chosen.

Plate Family set of three striped sun lounger cushions by a UK garden pool

One lounger per family member, the smallest sized for a child: striped backrests carry the color, plain seats keep the trio calm.

A Reading by CallumChaise Lounge & Sunbed Cushions

Three striped sunbed cushions by the pool, and how to measure every lounger

Three loungers, three colors, one small frame in the middle. The tape measure has to visit all three.

The quick answer

Measure every sunbed on its own, even when the loungers look like a matched set. Take the full length, the width, the distance from the foot to the backrest hinge, and the thickness you want, then send one drawing per frame. A child-size lounger gets its own cushion cut to size, and pieces that differ by 1.5 in (3.8 cm) need separate drawings.

Pinned by Callum: four marks around the pool

Four pins, from the coral stripe backrest to the wet paving where swimmers drip.

The numbers match the pins on the plate.

  1. Coral stripe backrestThe stripe goes on the upright part so it reads like a headboard from the house.
  2. Child-size aqua loungerA shorter frame gets its own cushion cut to size rather than a folded adult one.
  3. Solid gray seatA plain seat in the stripe's darker color hides sun-cream marks and wear.
  4. Wet pavingSwimmers drip here, which is why an outdoor membrane fabric was chosen.

Stripes up, solids down, three frames in a row

Three loungers stand on the sandstone like a family photo, and the smallest one is the reason to take a tape measure to every frame. These sunbed cushions look like a matched set. They are not cut from one size.

Each cushion changes fabric at the fold. The stripe rides the backrest, where it faces the house like a headboard. The seat below is a solid in the stripe's own color, box-edged and self-piped, so the piping runs straight along the frame and never fights the stripe. Sun cream and wet swimsuits land on the plain part, and plain hides them better.

The middle frame is child-size, and it wears aqua on purpose. Aqua sits between warm coral and cool gray, so the row never tips to one side. White aluminum and pale coping let all three colors read clean in hard midday sun. The board fence, the striped lawn and the brick houses behind are backdrop.

The wet paving is the working prop. Swimmers drip right there, which is why the cloth is a water-repellent membrane. Water-repellent is a promise; waterproof is a contract. Let the cushions dry in the sun after a swim, and read water-repellent vs waterproof cushions before you count on either.

How many loungers are on your patio, and are they truly the same size? More sets like this live in chaise and sunbed cushions and patio and porch cushions.

Measuring each lounger: four numbers per frame

  1. Full length

    Measure the cushion area from the foot of the frame to the top of the backrest, with the back laid flat. Write it on that lounger's own drawing.

  2. Fold point

    Measure from the foot to the hinge where the backrest tilts. That tells the cutter where the solid seat ends and the striped back begins.

  3. Width

    Measure across the frame where the cushion will sit. Frames that look alike are not always alike, so check each one, friend.

  4. Thickness, then the small frame

    Pick one thickness and write it on every drawing. Then measure the child's lounger from scratch. A shorter frame gets its own cushion, not a folded adult one. The sunbed cushion size guide walks through it.

A real project

The storage bench that was 1.5 in off

A buyer in the US sent drawings of outdoor storage benches with lift-up lids and backrests, in a place with hot summers and snowy winters. She wanted the seat cushions split at the lid lines, so each lid could open on its own.

One run was slightly asymmetric, about 1.5 in (3.8 cm) different in depth. So the shop asked for a separate, full drawing of every piece instead of one sketch for the lot. Two of the cushions came to 45.5 in (116 cm), all 3 in (7.6 cm) thick, with full back pillows and long round lumbar pillows to go with them.

The shop was plain about the cloth too: no Sunbrella, no fast-drying mesh bottom, no quick-dry foam. Its UV-resistant, water-repellent fabric suits a covered porch, with the cushions stored away for winter. She asked for close-ups of eight outdoor fabrics before choosing one.

Same rule by a pool: every frame, its own drawing. More on lids in storage bench cushions with a hinged lid.

Buyer questions: outdoor sets, a double chaise and the budget talk

  1. A common question

    I need outdoor cushions to replace the ones on my patio bench, seat and back. How are they priced?

    The workshop's answer

    By size, fabric and whether you add piping. Real quotes have covered a seat and back set of 50 x 30 x 4 in (127 x 76 x 10 cm) plus 50 x 16 x 4 in (127 x 41 x 10 cm), a longer 70 in (178 cm) set in the same layout, a single 25 x 25 x 4 in (64 x 64 x 10 cm) cushion, and an outdoor daybed cushion of about 86.5 x 35.5 in (220 x 90 cm), 4 in (10 cm) thick. The listing is for seat cushions; backs are quoted separately.

  2. A common question

    Can you make custom cushions for a double chaise lounge, with the back and the seat as separate pieces?

    The workshop's answer

    Yes. Both pieces are cut to your sizes, for example a back of 51.5 x 35 in (131 x 89 cm) and a seat of 51.5 x 49 in (131 x 124 cm). They are made in the shop's own weather-resistant outdoor fabrics, ordered through the outdoor listing with its fabric charts.

  3. A common question

    My budget is lower than the quote. Is there any room on the price?

    The workshop's answer

    Sometimes. Size, fabric and extras such as piping set the price, so skipping the piping or switching fabric family can bring a quote down. Multi-piece orders have been quoted as one set, and on a tight budget the shop has adjusted a quote once.

On the cutting table: the poolside trio

ProductSunbed cushions with a striped backrest and a solid seat, set of three
FramesTwo adult loungers and one child-size lounger in white aluminum
Fabric familyWater-repellent outdoor membrane
ColorsCoral, aqua and gray stripes, each with a solid seat in its own hue
EdgeBox edge
PipingSelf piping
Measure per frameFull length, fold point, width, thickness
CareDry in the sun after swims; store indoors for winter
Best forPool terraces and patios where swimmers drip

Order this cushion

Have it made

Have this made — ask Callum’s workshop

Short list: size, sun hours, how fast it has to dry. The workshop goes through it with you. — Callum

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
Water-repellent outdoor membrane
Foam
The core: its density and thickness set the feel.
Piping
Self piping
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

Measure every sunbed frame on its own and send one drawing per frame. A 1.5 in (3.8 cm) difference is enough to make a shared drawing wrong.

Callum

Questions buyers ask next

Can an adult sunbed cushion be folded to fit a child's lounger?

It can be folded, but it will not sit right. A shorter frame gets its own cushion cut to its length and width, so the fold lands at the hinge and nothing bunches at the foot. Measure the small lounger as carefully as the adult ones.

Is a water-repellent sunbed cushion the same as a waterproof one?

No. A water-repellent membrane makes splashes bead and roll off, which suits a pool deck. It is not a sealed waterproof shell, so let a wet cushion dry in the sun and bring the set indoors for winter.

Why put the stripe on the lounger backrest instead of the seat?

The backrest stands upright, so the stripe faces the house and reads like a headboard. The seat takes sun cream, wet swimsuits and wear, and a solid in the stripe's own color hides marks better than white bands.

Do three different stripe colors look planned on one row of loungers?

They do if each lounger follows one rule: one stripe on the back, its strongest color as a solid on the seat. Put the in-between hue in the middle, as the aqua sits between coral and gray here, and the row stays balanced.

Fair winds — Callum