CushionGuide
Get a quote

A Reading by CallumChaise Lounge & Sunbed Cushions

A cobalt palm-print sunbed cushion, and why every prop on the terrace earned its place

Strip a terrace down to what the wind can't take and you see what matters. Here that's one printed cushion, one white frame and four honest props.

Read by

The Weather Man of Casco BayPublished Updated 4 min read

Two-piece cobalt blue and white palm-leaf cushion on a white aluminum sun lounger on a terracotta terrace above the seaSave
A two-piece cobalt palm-print cushion dresses a white sun lounger on a whitewashed terrace above the sea.

The quick answer

A patterned sunbed cushion looks at home when its two colors come from the setting: one from the view, one from the walls. This two-piece cobalt and white palm print takes blue from the sea and white from the parapet, sits on a white aluminum frame, and has a thicker seat than back so the backrest tilts cleanly.

Three questions off the deck

  1. A common question

    Do you have a waterproof, spill-proof fabric for outdoor cushions?

    The workshop's answer

    Not waterproof, but water-repellent: there is a separate outdoor range with its own colors that sheds water, and the chart is sent on request. It can be used for tufted floor cushions and pallet-bench cushions too.

  2. A common question

    Can you replace a travel trailer cushion that's 6 ft by 31 in and at least 3 in thick?

    The workshop's answer

    Yes. RV and trailer cushions are made to the measurements you send, here 72 x 31 in (183 x 79 cm) at 3 in (7.6 cm) or more, and the workshop sends a purchase link for that size.

  3. A common question

    Does linen cost more than the cotton-type fabric?

    The workshop's answer

    No. There is no price difference between linen and the other standard fabric, so choose on looks and on where the cushion will live.

Now, the reading

Reading the terrace, prop by prop

Sun like this bleaches everything that isn't meant to be there. What's left on this roof terrace was chosen, and it shows.

Start with the frame. White aluminum. It doesn't fight the print, it won't rust in salt air, and it hands all the attention to the cobalt. A teak frame would warm things up, but it would also start a second conversation.

The cushion comes in two pieces. A thicker seat takes the weight; a separate back lets the backrest tilt without folding the fabric at the hinge. Self piping and a straight box edge keep the foot of the pad neat. That's how a chaise lounge cushion should behave: tidy at every angle.

Now the props. The whitewashed parapet gives the white half of the print somewhere to come from. The sea behind gives the cobalt its reason. Terracotta tile underfoot puts warmth back in, so all that blue doesn't feel cold once the sun drops. The potted succulents are the only green, small and tough, the kind of plant that shrugs at a week of hot wind. Nothing up here needs rescuing when the weather turns.

Copy it with one rule, friend: take one color of your print from the view and one from the walls. On a patio with a gray fence and a green lawn, that's a gray-and-green print, not cobalt. Browse outdoor acrylic with that rule in hand, and see patio and porch cushions for the rest of the deck.

What's the one color your view gives you for free?

Pinned by Callum, head to foot

Five pins, from the separate back cushion down to the sea that explains the blue.

Pinned: Two-piece cobalt blue and white palm-leaf cushion on a white aluminum sun lounger on a terracotta terrace above the sea
  1. Back cushion

    A separate back piece lets the backrest tilt without bunching the fabric.

  2. Seat cushion

    The seat is thicker than the back for more comfort where the weight is.

  3. Boxed front edge

    Self piping and a straight box edge keep the long pad neat at the foot.

  4. Aluminum frame

    A white frame keeps all attention on the cobalt print.

  5. Sea view

    Deep blue water behind is the reason cobalt feels right here.

  1. Back cushionA separate back piece lets the backrest tilt without bunching the fabric.
  2. Seat cushionThe seat is thicker than the back for more comfort where the weight is.
  3. Boxed front edgeSelf piping and a straight box edge keep the long pad neat at the foot.
  4. Aluminum frameA white frame keeps all attention on the cobalt print.
  5. Sea viewDeep blue water behind is the reason cobalt feels right here.

Four moves to copy the terrace

  1. Pick a two-color print: one color from the view, one from the walls.
  2. Keep the frame in the print's lighter color so the pattern leads.
  3. Add one warm material underfoot, such as tile, brick or a jute rug, to balance cool blues.
  4. Order seat and back as two pieces, the seat thicker, so the backrest tilts clean.
A real project

A lift-up RV lid and a strap nobody needed

An RV owner wrote in needing a 28.75 x 17 in (73 x 43 cm) cushion for a bench whose lid lifts for storage, in fabric T-314. They asked for a strap to hold it to the lid.

The workshop suggested something tidier: a non-slip fabric base, which holds the cushion in place without straps, and cream piping for a soft contrast against T-314. The buyer sent a drawing and took both suggestions.

Straps on a lift-up lid snag, fray and swing loose every time you reach for the jumper cables. A grippy underside just sits there and works. The same thinking fits any pad that rides on a lid; see storage bench cushions on hinged lids.

On the cutting table

CushionTwo-piece sunbed pad: seat and separate back
FabricOutdoor print, cobalt and white palm leaf
PipingSelf piping
EdgeStraight box edge
ThicknessSeat thicker than the back
FrameWhite aluminum lounger
SettingWhitewashed sea-view roof terrace, terracotta tile
PropsParapet walls, sea view, potted succulents
Best forSunny terraces and pool decks with a view

Order this cushion

Have it made

Have this made — ask Callum’s workshop

Tell them where it lives. Porch, deck or boat: the weather picks the fabric and the foam before anyone else does. — Callum

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
Outdoor print, cobalt and white palm leaf
Foam
The core: its density and thickness set the feel.
Piping
Self piping
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

A printed sunbed cushion looks at home when one color comes from the view and the other from the walls: cobalt from the sea, white from the parapet.

Callum
Share on X (opens a new window)

Questions buyers ask next

Why is a sunbed cushion made in two pieces?

A separate back lets the backrest tilt without folding or bunching the fabric where the frame hinges. It also lets the seat be thicker than the back, which puts the comfort where the weight is.

What color sunbed cushion suits a white lounger frame?

Almost any print, because white steps back. Pick two colors from the setting, one from the view and one from the walls, and the frame will let the pattern lead instead of competing with it.

Does a patterned lounger cushion need contrast piping?

Not usually. Self piping, cut from the same print, gives the box edge a clean line without adding a third color. Contrast piping earns its place on plain fabrics, where the outline has something to say.

How do I keep an outdoor cushion from sliding off a lift-up lid?

Ask for a non-slip base on the underside of the cover. It grips the lid without straps, so nothing snags, frays or hangs loose when the lid opens for storage.

Fair winds — Callum

More printed outdoor cushions in the sun

Amber outdoor sun lounger cushion with self piping and knotted fabric ties on a weathered teak lounger by a poolSave
An amber lounger cushion is tied to the frame at the hinge, where the seat and back sections meet.
Pistachio green and white kilim-pattern sun lounger cushion on a teak lounger on a wooden deck overlooking a lakeSave
A lake cottage deck with green chairs and a moored boat; the pistachio pattern keeps the lounger in the same fresh green family.
Teal seat cushion and green, lime and navy chevron-striped backrest on a weathered teak lounger on a deck above sand dunesSave
On a dune-top deck, the teal seat picks up the sea and the banded backrest brings in the greens of the grass.
Pale blue ticking-stripe seat and back cushions with a front drop on a wooden garden swing among rosesSave
A soft blue ticking stripe covers the seat and two back cushions of a timber garden swing, with the seat fabric dropping over the front rail.
Ivory box cushion with navy piping on a teak chaise lounge on a rooftop deck, olive tree and city skyline behindSave
A navy-piped ivory cushion on a teak chaise, set to face the skyline from a silver-gray roof deck.
Ochre, gray and ivory striped outdoor cushion on a white built-in lounger with charcoal pillow and linen throw above the seaSave
A striped outdoor cushion softens a whitewashed masonry lounger on a pebble-paved terrace above the sea.