CushionGuide
Get a quote

The Cutting Table · a common question

How many metal bars come with the floor sofa, and does it need assembly?

Also asked as:how many stainless steel stabilizersonly 2 metal brackets?

Four bars, friend. That's the short of it. The cushions come ready to sit on; the bars are the only rigging you set up yourself.

Answered by

The Weather Man of Casco Bay ·

The quick answer

A standard teddy floor sofa comes with 4 identical metal support bars: 2 for the sides and 2 for the back. The cushions arrive already in their covers, so the only assembly is connecting the chrome bars, which ship apart. Twist and push each joint until the click-dots lock; a diagram or setup video comes on request.

Cream velvet floor sofa with bright cobalt blue end panels on a jute rug in a white room, beside a potted ficusSave
Cobalt blue velvet ends make a bold, graphic floor sofa in an otherwise all-white room.

Get a quote for a modular floor sofa

Key facts

  • The standard floor sofa includes 4 metal support bars, all the same size.
  • 2 bars go on the sides and 2 on the back.
  • Cushions arrive already in their covers and ready to use.
  • The chrome bars ship unassembled; a diagram or setup video is provided.
  • Tube diameter has been given as about 5/8 in (16 mm) in one reply and about 3/4 in (18 mm) in another.
  • On the bars listing, choosing '2' gets two full bar units.
  • Bars aren't sold on their own, only as replacements or with a backrest purchase.
  • The bars ship in a small separate box, about 16 x 16 x 2 in (40 x 40 x 5 cm) and about 9 lb (4 kg).

Have it made

Have Callum’s workshop cut this for you

Tell them where it lives. Porch, deck or boat: the weather picks the fabric and the foam before anyone else does. — Callum

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
The cover cloth: weave, color and care code.
Foam
The core: its density and thickness set the feel.
Piping
The corded seam edge: matching, contrast or none.
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

Why a floor sofa has 4 metal bars, not 2

One buyer wrote 'only 2 metal brackets?' and worried the set was short. It isn't. The standard floor sofa comes with 4 metal support bars of the same size: 2 along the sides, 2 along the back. A frame with half its bars is a boat with half its lines.

The mix-up has a second source: on the bars listing, choosing '2' gets two full bar units, not two tubes. Bars are otherwise sold only as replacements or with a backrest. The modular floor sofa atlas shows how the pieces sit.

Rigging the frame

  1. Lay out the bars

    Four bars, all the same size: two for the sides, two for the back.

  2. Twist and push

    Push the tube ends together with a twist until the click-dots lock. A metal insert inside the tube grips the joint.

  3. Ease a stiff joint

    If a joint is too tight, click that piece in and out of the corner piece a few times, then try again.

  4. Sit down

    The cushions arrive in their covers, ready to use. The support bars pattern shows the joints up close.

Bar tube diameter: 5/8 in or 3/4 in?

Two replies, two numbers: about 5/8 in (16 mm) in one and about 3/4 in (18 mm) in the other. Forecasts disagree too; you pack for both. If the exact bar diameter matters for a replacement, ask before you order. Which joint on yours is the stubborn one?

Floor sofa cushions arrive in their covers, ready to sit on. The only assembly is the chrome bars: twist, push, and wait for the click-dots to lock.

Callum
Share on X (opens a new window)

Buyer questions

  1. A common question

    How many metal stabilizers come with the couch, and how do they go together?

    The workshop's answer

    Four: two for the sides and two for the back. Twist and push the tubes together until the click-dots lock. If a joint is too tight, click each piece in and out of the corner piece a few times. A setup video comes on request.

  2. A common question

    Will I need to assemble the sofa when it arrives?

    The workshop's answer

    Only the bars. The cushions arrive already in their covers and ready to use; the one setup job is connecting the chrome support bars, with a diagram or video to follow.

  3. A common question

    Can I buy the metal frame separately?

    The workshop's answer

    Not on its own. The sofa comes with 4 same-size bars, 2 on the sides and 2 on the back, and bars are sold only as replacements or with a backrest purchase.

Questions buyers ask next

Are all four floor sofa bars the same?

Yes. The four bars in a standard set are the same size, so there's no left or right to sort out before you start. Two run along the sides and two along the back.

Is there a video for setting up the floor sofa?

Yes. A setup video or diagram is sent on request. Most of the job is one motion, repeated at each joint: push the tube ends together with a twist until the click-dots lock.

Why won't a bar joint click in?

New joints can be stiff. Click the piece in and out of the corner piece a few times to loosen it, then push with a twist until the dots lock. The metal insert inside the tube does the gripping.