A Reading by HanaIKEA Hemnes Daybed Covers & Cushions
Cream velvet Hemnes daybed covers, rust piping, and what is worth paying for
One strong color. One cord, repeated on five pieces. Spend on the measuring, and the rest can stay simple.
The quick answer
For a Hemnes daybed cover, spend on the fit and save on the trim. Size every piece from the real mattress, not the wooden frame, and give its true depth, since a thicker mattress needs a deeper boxed cover. Then choose piping: cream-on-cream is the zero-risk route, and one warm contrast cord repeated on all five pieces makes a set.
Save
Save
Save
Save
Save
Save
SavePinned by Hana, along the backrest
Five pins along the backrest, from the cord over the crown to the corner of the mattress cover.

- Piping over the crown
The cord runs along the top seam, so the pillow keeps a crisp ridge even after it is plumped and leaned on.
- Rust cord down the side
Velvet shows every soft crease; the piped edge gives the eye one straight line to follow instead.
- Cream velvet pile
The pile looks lighter or darker depending on which way it is brushed, so shading like this is normal for velvet.
- Bolster at far arm
The bolster is sized from the same mattress measurements as the back pillows, so the ends line up.
- Mattress cover edge
The same burnt-orange cord repeats on the mattress cover so all five pieces read as one set.
- Piping over the crownThe cord runs along the top seam, so the pillow keeps a crisp ridge even after it is plumped and leaned on.
- Rust cord down the sideVelvet shows every soft crease; the piped edge gives the eye one straight line to follow instead.
- Cream velvet pileThe pile looks lighter or darker depending on which way it is brushed, so shading like this is normal for velvet.
- Bolster at far armThe bolster is sized from the same mattress measurements as the back pillows, so the ends line up.
- Mattress cover edgeThe same burnt-orange cord repeats on the mattress cover so all five pieces read as one set.
What the end view shows
Seen end-on, a pillow cannot hide its edge.
This photograph looks down the backrest of a white IKEA Hemnes daybed toward a bright window. A cream velvet back pillow fills the near frame. Its burnt-orange piping runs over the crown and down the side, sitting on the seam itself. The cord outlines the pillow without changing its size.
Velvet shows every soft crease. The piped edge gives the eye one straight line to follow instead. The pile looks lighter in one place and darker in another. That is the nap, brushed two ways. It is normal for velvet.
At the far arm, a cream bolster. It was sized from the same mattress measurements as the back pillows, so the ends line up. At the bottom of the frame, the corner of the mattress cover carries the same cord. Five pieces. One trim. One set.
The window is white. The palm is green and still. Neither asks for attention, so the pile and the cord do the talking.
The trim is the one decision that ties the set together. What warm thing is already in your room?
A clay pot. An oak side table. That is your piping color.
Where to spend and where to save on a Hemnes daybed set
- Spend on the measurement. Give the real mattress depth, not the frame size.
- Spend on a second mattress cover if the daybed is used every day, ordered with the set so both come from one dye lot.
- Save on piping risk. Cream-on-cream is the zero-risk choice.
- Save on extras. One contrast color, repeated, looks richer than three.
- Save on second thoughts about pile. If velvet feels too fluffy, a smoother fabric and corduroy are on the same charts.
— Hana



