CushionGuide
Get a quote

The Cutting Table · a checklist answer

Will your replacement covers fit a teddy floor sofa from another brand?

Also asked as:Will your covers fit my teddy couch?Modular teddy sofa from another shop, would it fit?

A cover makes a promise about size first and color second. Check both before you change a whole sofa's wardrobe.

Answered by

The Colorist of New Orleans ·

Elevated view of a gray woven window seat cushion fitted wall to wall in a white recess below garden casement windowsSave
From above, the cushion fills the recess in one continuous piece. Linen curtains hang on both sides to frame the garden view.

The quick answer

Teddy sofa replacement covers usually fit another brand's sofa when the dimensions match: seats of 78 x 39 x 6.5 in (200 x 100 x 17 cm) and L-shaped backrests of 39 x 39 x 15 in (100 x 100 x 39 cm), the same as or very close to the original designer teddy sofa. Measure each piece's height first; another maker's foam backrest may sit slightly loose.

Get a quote for a cushion covers

Key facts

  • Seat covers fit 78 x 39 x 6.5 in (200 x 100 x 17 cm) cushions.
  • L-shaped backrest covers fit 39 x 39 x 15 in (100 x 100 x 39 cm) pieces.
  • The whole sofa measures 39.5 x 79 x 13.5 in (100 x 200 x 34 cm).
  • The sizes are the same as or very close to the original designer teddy sofa.
  • Over 1,000 of these covers have been sold.
  • Another maker's foam-filled backrest may sit slightly loose.
  • For rust corduroy, the closest tone is Brick (COR-205); order a sample first.

Have it made

Have Élodie’s workshop cut this for you

A fabric reads one way at noon and another at dusk. Mention your light, and the workshop will weigh it with you. — Élodie

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
The cover cloth: weave, color and care code.
Foam
Another maker's foam-filled backrest may sit slightly loose.
Piping
The corded seam edge: matching, contrast or none.
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

Before you order: the fit checklist

  • Measure each seat cushion's length, width and height
  • Compare with 78 x 39 x 6.5 in (200 x 100 x 17 cm)
  • Measure each L-shaped backrest, height included
  • Compare with 39 x 39 x 15 in (100 x 100 x 39 cm)
  • Note whether your backrest insert is foam-filled or fiber-filled
  • Order a fabric sample if you're matching a color you already own

Where the fit can go soft

  • A foam-filled backrest from another maker may sit slightly loose in the backrest cover
  • Inserts of a different height: one buyer's own inserts didn't match the backrest covers
  • Whole conventional sofas: fitted slipcovers for them aren't made

What the covers-only set holds

CoverHow manyFits
Seat cover278 x 39 x 6.5 in (200 x 100 x 17 cm)
L-shaped backrest cover239 x 39 x 15 in (100 x 100 x 39 cm)
PillowcasesIncludedThe sofa's pillows
Metal barsExtraOrdered separately

Size first, then the color in daylight

Size decides whether a cover fits; color decides whether you'll love it. The workshop is its own brand, not a reseller, and its pieces were cut to the same or very close dimensions as the original designer teddy sofa. Owners of that sofa have bought these covers without size trouble, and the workshop says the other brand's covers should fit its sofa too.

Color is subtler, my friends. If your sofa wears a rust corduroy now, the nearest tone is Brick, COR-205, a warm fired-clay red. Daylight never lies; your screen sometimes does, so order a sample and hold it against the sofa by a window before committing.

The cushion covers page shows the sets, boucle and teddy fabrics covers the pile family, and floor sofa replacement covers walks through ordering. What color is your sofa wearing now?

Replacement covers fit another brand's teddy sofa when the pieces measure 78 x 39 x 6.5 in seats and 39 x 39 x 15 in backrests.

Élodie
Share on X (opens a new window)

Buyer questions

  1. A common question

    Do your replacement covers fit the original designer teddy sofa?

    The workshop's answer

    Several customers who own that sofa bought the covers and had no size problems.

  2. A common question

    Will your covers fit a teddy sofa I bought from another brand?

    The workshop's answer

    A covers-only set has two seat covers of 78 x 39 x 6.5 in (200 x 100 x 17 cm) and two L-shaped backrest covers of 39 x 39 x 15 in (100 x 100 x 39 cm). Teddy-style sofas are usually this size, but measure yours against these numbers before ordering.

  3. A common question

    Will the backrest covers fit my other-brand sofa's foam backrests?

    The workshop's answer

    Probably. Several customers bought covers only for other brands' sofas and were happy with the fit. With a 78¾ x 39¼ in (200 x 100 cm) base the fit is close, but a foam-filled backrest from another maker may sit slightly loose in the backrest cover.

  4. A common question

    I already own covers. Can I buy just the cushions and the bars?

    The workshop's answer

    Yes. One buyer ordered the cushions and bars without covers to use with covers they already had, since the workshop's sizes are the same as or very close to the original designer teddy sofa.

Questions buyers ask next

Can I match my sofa's current rust corduroy?

The closest tone to rust corduroy is Brick, code COR-205. Another maker's dye may differ slightly, so order a fabric sample first and check it against your sofa in daylight.

Is the workshop a reseller of the designer teddy sofa?

No. The workshop is its own brand, not a reseller. Its cushion sizes follow the same dimensions closely, and it says the other brand's covers should also fit its own sofa.

What should I send if my sofa's pieces seem smaller than the covers?

Send each piece's length, width and height before ordering, measured on the insert. The workshop compares them with its sizes, so you know in advance whether a cover would sit snug or loose.