CushionGuide
Get a quote

The Cutting Table · a checklist answer

Can I still machine wash a cushion cover with a non-slip base?

Also asked as:Still machine washable with the non-slip base?Can I wash a cover with a non-slip bottom?

A grippy underside and a velvet top can share one wash. They only ask for a cool cycle, and no heat afterward.

Answered by

The Colorist of New Orleans ·

Caramel bouclé trapezoid cushion with tonal piping on a cream bay window seat under arched windows, with a red rugSave
The same angled bay idea with tonal piping: softer edges that let the arches and stone sills do the talking.

The quick answer

Yes, a zippered cushion cover with a non-slip base stays machine washable, velvet included. Wash it at 86°F (30°C) on a delicate cycle and skip the tumble dryer, because the non-slip backing doesn't tolerate the dryer. Rubberized backing can shed a few particles in the drum, so air dry the cover, shake it out and run a lint roller over it.

Get a quote for a cushion covers

Key facts

  • Covers made with a non-slip base remain machine washable, velvet included.
  • Wash at 86°F (30°C) on a delicate cycle.
  • Do not tumble dry a cover with non-slip backing.
  • Rubberized non-slip backing can shed particles in the wash.
  • Air dry, shake out and lint-roll the cover after washing.
  • On the floor sofa, the white non-slip bottom is a separate zip-off piece that is not washed.
  • Cover fabrics are upholstery grade, with a stated minimum weight of about 7.4 oz per square yard (250 g/m²).
  • The pet-friendly G-series fabric, 100% polyester, washes at the same 86°F (30°C).
  • Fitted mattress covers are cut about 0.5 in (1 to 2 cm) under the measured thickness, so a snug zip-up is by design.

Have it made

Have Élodie’s workshop cut this for you

Describe the room at four in the afternoon: the floor, the wall, the one color you love. That is where a good fabric choice begins. — Élodie

Leave your details and the workshop will call you to confirm measurements, fabric, foam and piping. No prices, dates or payment on this page: it is a request, not an order.

Fabric · Foam · Pipingwhat the workshop will confirm with you

Fabric
Covers made with a non-slip base remain machine washable, velvet included.
Foam
The core: its density and thickness set the feel.
Piping
The corded seam edge: matching, contrast or none.
Only for this request: no marketing calls or texts. Outside the US, add the country code.
In inches: length × depth × thickness, plus any angles or cut corners.

* Required. A member of the workshop team will call you to talk it through; nothing is charged and nothing is made until you have agreed on every detail with them.

We use these details only to answer this request and make your cushion: your name and contact details, the cushion details and photos you send, the page you came from and the ad or link that brought you, if any. The workshop that makes the cushions receives them. We don't sell them or share them for advertising, and we delete requests after 24 months. Privacy notice for requests.

Nothing is made or charged until you approve the details.

Want to pick the shape and add photos? Use the full quote form

Before the cover goes in

  • Unzip the cover and slide the insert out
  • If the non-slip layer unzips on its own, as on the floor sofa, set it aside unwashed
  • Choose a delicate cycle at 86°F (30°C)
  • Treat velvet and linen covers the same way

What to skip when washing a non-slip cover

  • The tumble dryer, at any setting
  • Washing a floor sofa's zip-off non-slip bottom
  • Pulling the cover off a button-tufted cushion: it doesn't come off, so spot clean

Why heat, not water, harms a non-slip base

My friends, this question has reached the workshop with a velvet cover in mind, and with a dining area where crumbs are daily weather. You added the non-slip base so the cushion stays put, and now you wonder whether it has made the cover precious. It hasn't. A cushion cover with a non-slip base still unzips and still goes in the machine.

What changes is the drying. The rubberized backing does not tolerate the dryer, so the cover dries in the air. In the drum it can also let go of a few small specks; a shake and a lint roller lift them off the pile of a deep bottle-green velvet or the slub of an oat linen. The washing Pattern covers every fabric, and velvet's own page explains how its nap likes to be treated. What will sit on yours most days?

How to dry the cover after the spin

  1. Air dry

    Lay the cover flat or hang it. No dryer, not even on low.

  2. Shake it out

    A few firm shakes free loose particles from the backing.

  3. Lint-roll both sides

    Pass a lint roller over the fabric and the base to lift what's left.

  4. Zip it back on

    Once dry, slide the insert back in and close the zipper on the underside.

Non-slip backing and velvet share one wash: 86°F (30°C), delicate cycle, air dry, then a lint roller for the loose rubber specks.

Élodie
Share on X (opens a new window)

Buyer questions

  1. A common question

    If I add a non-slip base to a zippered velvet cover, can it still go in the washing machine?

    The workshop's answer

    Yes. Covers made with a non-slip base can still be machine washed. Use 86°F (30°C) on a delicate cycle and don't tumble dry.

  2. A common question

    Are the covers washable, even with a non-slip bottom?

    The workshop's answer

    Yes. The fabrics are made for easy care, and a non-slip bottom doesn't change that. The soft fabric was recommended as especially easy to clean, which is why one buyer in the US chose it over tufting for a dining area.

  3. A common question

    Do the covers come off completely for washing?

    The workshop's answer

    Yes. Every cover unzips from the underside and comes off, and all fabrics, velvet and linen included, machine wash at 86°F (30°C) on a gentle cycle. Air dry them. Button-tufted cushions are the exception.

  4. A common question

    Can I spray a fabric protector on my covers?

    The workshop's answer

    Yes, once they arrive. The main protection is washability at 86°F (30°C); the teddy fabric is water-repellent, while velvet has no stain-repellent coating.

Questions buyers ask next

Why are there tiny rubber specks after washing a non-slip cover?

Rubberized non-slip backing can shed some particles in the machine. Air dry the cover, give it a good shake, and pass a lint roller over both sides to lift what remains from the fabric and the base.

Can a cover with non-slip backing go in the dryer on low heat?

No. The non-slip backing doesn't tolerate the tumble dryer, so skip it entirely and dry the cover in the air. Lay it flat or hang it, then shake it out and lint-roll it before zipping it back on.

Does the floor sofa's non-slip bottom go in the wash with the covers?

No. On the floor sofa, the white non-slip bottom is a separate zip-off piece and is not washed. Unzip it first; only the fabric covers take the 86°F (30°C) delicate cycle.