---
title: "Teal Velvet Bolster Pillow on a Linen Bed: Size and Proportion"
url: "https://cushionguide.com/readings/teal-blue-velvet-bolster-linen-bed-waffle-pillows/"
section: "Readings"
author: "Harlan Pruitt, The Elder of High Point"
author_url: "https://cushionguide.com/masters/harlan/"
published: "2026-08-28"
updated: "2026-09-24"
keywords: "bolster pillow, custom throw pillows, cushion cover, custom cushion covers, made to measure cushion"
---

# A teal velvet bolster pillow across a linen bed, and the proportion that makes it sit right

*Harlan writes a letter about one round velvet roll on a pale oak bed: how thick, how long, and why the piped ends matter more than most people think.*

> **The quick answer:** A bolster pillow on a bed looks right when its length runs about two-thirds to three-quarters of the mattress width and its diameter stays near 8 in (20 cm), the size most bolsters are made. This teal velvet roll with self-piped ends sits in front of cream waffle pillows, low enough to frame them rather than hide them.

![Teal blue velvet round bolster with self piping on a white linen bed in front of cream waffle-knit pillows](https://cushionguide.com/media/bolster-pillows/teal-blue-velvet-bolster-linen-bed-waffle-pillows-1600.webp "A long teal velvet bolster with piped ends lies across a linen-dressed bed, framed by cream waffle pillows and a candle on the nightstand.")

## A letter about one teal roll on a pale bed

My friend,

A bolster that is too fat turns a bed into a sofa, and one that is too thin looks like a draft stopper. The teal velvet bolster pillow on this pale oak bed is neither, and I want to tell you why.

It lies across white linen in front of two cream waffle-knit pillows. Its diameter is modest, so it covers the lower edge of those pillows without climbing their faces. Its length stops well inside the mattress corners. That is the whole trick of proportion on a bed: the roll frames what stands behind it and never competes.

Look at the ends. Each round disc is finished with self piping, a cord covered in the same teal velvet. Without that cord a velvet end disc tends to pucker, and one wrinkled end is all the eye will see. With it, the circle stays flat and the roll looks tailored, not stuffed.

The morning light here is soft and cool. Velvet remembers every stroke of the hand, and the pile along the roll catches that light, so one side reads bright teal and the other deepens toward ink. The waffle knit behind is matte, which is why the sheen shows at all.

None of the props is an accident. The candle on a woven rattan tray puts one warm flame against all that cool teal. The ceramic vase of baby's breath repeats the white of the linen. The books on the rough wood nightstand say somebody reads here.

## Pinned by Harlan

Follow the pins from the piped round end across the velvet body to the waffle pillows, the candle and the vase of baby's breath.

1. **Piped round end**: Self piping keeps the velvet end disc flat and free of puckers.
2. **Teal velvet body**: The pile catches light along the roll and shows its depth of color.
3. **Waffle-knit pillows**: Matte cream texture behind makes the velvet sheen stand out.
4. **Candle on tray**: A warm flame balances the cool teal.
5. **Vase of baby's breath**: Soft white stems echo the linen bedding.

## How thick and how long a bed bolster ought to be

Most bolsters the workshop makes are about 8 in (20 cm) across. A buyer once asked about a 20 in (51 cm) cylinder, and the honest answer was that it would be unusually large, closer to a pouf than a pillow.

Length follows the mattress. A neat rule is two-thirds to three-quarters of its width. On a queen, 60 in (152 cm) across, that is a bolster of 40 to 45 in (102 to 114 cm). The workshop has cut them 44 in (112 cm) long and 6 in (15 cm) across for a slimmer line, and 65 in (165 cm) long and 7 in (18 cm) across for a long rest. When a bench runs longer still, the bolster can be split into two pieces, each easy to lift.

Put the tape on the bed first. Then look through the [bolster pillows in the Cushion Atlas](https://cushionguide.com/cushions/bolster-pillows/), read the [bolster size and diameter pattern](https://cushionguide.com/guides/bolster-pillow-size-diameter/), and keep the [velvet shelf](https://cushionguide.com/fabrics/velvet/) open beside you. What does your mattress measure across?

## Eight covers cut to answer one bench

A buyer got in touch after ordering a bench cushion in one color with piping in a second, and asked a fair question: could the workshop make throw pillow covers to match, for inserts they already owned?

The plan changed along the way. It began at 18 x 18 in and 23 x 25 in, and settled on eight covers, some about 25 x 25 in (63 x 63 cm) and the rest about 17 x 17 in (44 x 44 cm). The bodies came in three colors, with the piping colors traded between them, so the set talked to the bench without copying it.

The shop showed them that the zippered cover listing works for pillow covers too, as long as you give exact sizes, and sent a custom link. That is the lesson I would hand any young tailor: [custom cushion covers](https://cushionguide.com/cushions/cushion-covers/) are ordered by exact size, not by the name of the pillow.

## On the cutting table: the teal bolster

|   |   |
|---|---|
| Piece | Round bolster pillow |
| Fabric | Teal blue velvet |
| Piping | Self piping on both round ends |
| Ends | Flat piped discs, no gathers |
| Usual diameter | About 8 in (20 cm) |
| Length on a bed | Two-thirds to three-quarters of the mattress width |
| Long benches | Bolster can be split into two pieces |
| Covers | Zippered covers made to exact sizes |
| Best for | Pale beds that want one strong horizontal line |

## Buyer questions: spare covers, matching rolls and a torn seam

**A common question:** Do you sell covers on their own, so I can change the color later?

**The workshop's answer:** Yes. A full extra cover set can be ordered by itself. The shop sends a custom link in the color you choose, the link stays open if you would rather buy later, and extra covers can ship together with the main order.

**A common question:** Can you make bolster pillows that match my bench cushion?

**The workshop's answer:** Yes. Bolsters come in the bench fabric or entirely in a contrast or stripe, in custom lengths and diameters, such as 44 in (112 cm) long by 6 in (15 cm) across. Most are about 8 in (20 cm) in diameter; a 20 in (51 cm) cylinder would be unusually large. On a long bench the bolster can be split in two.

**A common question:** A cover arrived torn, and another was missing its piping. Will you replace them?

**The workshop's answer:** Yes. A cover that ripped in shipping and an L-shaped armrest cover that arrived without its piping were both replaced with new covers. For one small tear found after unpacking, the shop asked the buyer to share the cost, a quarter of that cover's price.

> A velvet bolster end without piping tends to pucker; a self-piped edge keeps the round disc flat and the whole roll looking tailored.
>
> — Harlan

> **Tailor's margin:** Keep a bed bolster near 8 in (20 cm) across; a 20 in (51 cm) roll stops being a bolster and becomes furniture.

## Questions buyers ask next

### Where does a bolster go on a bed with two sleeping pillows?

In front of the pillows, lying along the mattress. At about 8 in (20 cm) across it covers their lower edge without hiding their faces, so the bed reads as layered rather than stacked, and the bolster can come off at night in one move.

### What length bolster suits a queen bed?

Two-thirds to three-quarters of the mattress width. A queen is 60 in (152 cm) across, so a bolster of 40 to 45 in (102 to 114 cm) sits inside the edges and leaves the corners of the bed clean.

### Why does one side of a velvet roll look darker than the other?

Velvet pile reflects light by the direction it lies. Along a round bolster the pile turns toward the window on one side and away on the other, so one face gleams and the other deepens. That shift is what gives teal its depth.

## Related at the atelier

- [Bolster Pillow in Cocoa Velvet Against a Mauve Headboard](https://cushionguide.com/readings/cocoa-velvet-bolster-mauve-headboard-sage-wall/): A cocoa velvet bolster pillow reads best when it sits one shade deeper than the headboard behind it, finished with self piping on the end caps.
- [Bolster Pillow in Powder Blue Velvet: Pile, Wear and Washing](https://cushionguide.com/readings/powder-blue-velvet-bolster-black-iron-scrolls/): Powder blue velvet on a bolster pillow is a short, tight, non-shiny polyester pile that looks lighter or darker as the pile leans and the light moves, and it spot-cleans easily.
- [Violet Velvet Bolster Pillow: How It Stays Put on a Daybed](https://cushionguide.com/readings/violet-velvet-bolster-closeup-white-daybed/): A bolster pillow on a daybed stays put by position, not by ties: set in the corner between the backrest and the arm, it is held on two sides.
- [Can I buy just a bolster, or only a bolster cover?](https://cushionguide.com/answers/buy-single-bolster-or-bolster-cover/): Yes, you can order a single bolster or just a custom bolster cover.
- [Can I get round bolsters as armrests at each end of my window seat?](https://cushionguide.com/answers/round-bolster-armrests-window-seat-bench/): Yes, bolster armrests for a window seat are made to match the seat's fabric and piping, one for each end, usually as long as the seat is deep.
- [Will a bolster stay in place, or can it be attached?](https://cushionguide.com/answers/attach-bolster-strap-hook-and-loop/): A bolster ships loose, with no strap, unless you ask for one on the order.
- [What to measure for a custom daybed mattress cover](https://cushionguide.com/guides/daybed-mattress-cover-measurements/)
- [Bolster pillow sizes: choosing diameter and length for a seat or daybed](https://cushionguide.com/guides/bolster-pillow-size-diameter/)

*Sit well. — Harlan*

---

Written by Harlan Pruitt (https://cushionguide.com/masters/harlan/) for CushionGuide (https://cushionguide.com/about/). The site explains made-to-measure cushions and the partner workshop makes them; measurements are in inches first. This Markdown mirrors the page at https://cushionguide.com/readings/teal-blue-velvet-bolster-linen-bed-waffle-pillows/