---
title: "Hemnes Daybed Cover in Rust Linen-Look with Charcoal Piping"
url: "https://cushionguide.com/readings/rust-hemnes-daybed-covers-charcoal-piping-white-room/"
section: "Readings"
author: "Hana Lindqvist, The Quiet Geometer of Seattle"
author_url: "https://cushionguide.com/masters/hana/"
published: "2026-07-24"
updated: "2026-07-24"
keywords: "hemnes daybed cover, ikea hemnes daybed cushion, daybed cover, daybed cushion, bolster pillow, custom cushion covers"
---

# Rust Hemnes daybed covers with charcoal piping, and how the cloth lives day to day

*An empty room is honest. Nothing distracts from the fit, or from the cloth.*

> **The quick answer:** A rust linen-look cover on an IKEA Hemnes daybed gives a matte, lightly textured surface, and charcoal piping keeps the warm color from looking loud. Only the zippered seat cover is machine washable, on a gentle cold cycle; the back cushions are not. For two stacked 4.75 in mattresses, order a cover about 9.5 to 10 in thick.

![White Hemnes daybed with a rust linen-look mattress cover, back cushions and bolsters trimmed in charcoal piping](https://cushionguide.com/media/ikea-hemnes-daybed-covers/rust-hemnes-daybed-covers-charcoal-piping-white-room-1600.webp "Rust linen-look covers with charcoal piping are shown on a white Hemnes daybed in an empty room, so the fit and the piping lines are easy to judge.")

## Pinned by Hana: five points on the plate

Five pins, from the charcoal-piped bolster end to the white drawer fronts the cover leaves free.

1. **Charcoal-piped bolster**: Dark piping on the bolster end gives a warm rust a smart tailored finish.
2. **Mattress edge piping**: The piping line runs straight along the mattress front, showing a snug fit on the Hemnes mattress.
3. **Rust back cushion**: Back cushions stand the full height of the frame back, giving upright seating.
4. **Bolster at the arm**: A bolster at each arm fills the gap between mattress and frame.
5. **White drawer fronts**: The cover stops above the drawers, so storage is still easy to reach.

## The hand of a rust linen-look

Nothing else is in the room. So the eye goes straight to the cloth.

The rust is a linen-look fabric. It has the matte, slubbed face of linen without being linen. The surface is dry to the touch rather than slick, with a small irregular texture under the palm. On a mattress cover that matters. A matte cloth does not shine at the corners where it is pulled tight.

Look at the front edge. The charcoal piping runs straight along the mattress, corner to corner. A straight line there means the cover was sized to the mattress, not guessed. Charcoal is a softer contrast than black against rust. It frames the warm color and keeps it calm.

The back cushions stand the full height of the frame back, so the daybed sits upright, like a sofa. A bolster at each arm fills the gap between mattress and frame, and its piped end repeats the front line. The cover stops above the drawers. Storage stays open.

On gray tiles the rust reads bright and modern. On an oak floor with a cream rug it would read as autumn.

Same cloth.
Different floor.
A different room.

If you are weighing the real thing against the look, [real linen vs linen-look](https://cushionguide.com/guides/real-linen-vs-linen-look-cushion-fabric/) compares them. The family lives in [linen-look fabrics](https://cushionguide.com/fabrics/linen-look-fabrics/), and other sets in [IKEA Hemnes daybed covers](https://cushionguide.com/cushions/ikea-hemnes-daybed-covers/).

## Before the order goes in

- ✓ Measure the mattress itself: length, width and height.
- ✓ Two stacked mattresses? Add their heights. Two 4.75 in (12 cm) layers need a 9.5 to 10 in (24 to 25 cm) cover.
- ✓ Choose round bolsters or rectangular side pillows for the arms.
- ✓ Order samples first. Each sample order holds up to 5 fabric codes.
- ✓ Adding another seat to the order? Send every edge and the thickness.

## Two mattresses, one taller cover

A buyer in the US wanted the full Hemnes set in terracotta with cream trim. Not round bolsters, though. Rectangular side pillows, 12 x 30 in (30.5 x 76 cm).

The mattress measured 74.5 x 38.25 in (189 x 97 cm), made of two stacked twin mattresses, each 4.75 in (12 cm) thick. The back cushions were 17 x 36 in (43 x 91 cm). The workshop advised a cover built for 9.5 to 10 in (24 to 25 cm), not 8 in (20 cm). Two layers add up. A cover sized to the true height looks filled, not loose.

The buyer placed two sample orders, because each is capped at 5 codes. Then asked for a custom chair seat as well, and was asked for every edge and the thickness.

Height is a feeling. It starts with a tape measure. What sits under your daybed cover: one mattress or two? The full routine is in [measuring for a Hemnes daybed cover](https://cushionguide.com/guides/ikea-hemnes-daybed-cover-measuring/).

## On the cutting table: the rust set

|   |   |
|---|---|
| Product | IKEA Hemnes daybed cover set: mattress cover, two back cushions, two bolsters |
| Fabric | Rust linen-look |
| Piping | Charcoal contrast on the mattress front and bolster ends |
| Edge | Box edge on the mattress cover |
| Fit | Snug at the corners, straight piping along the front |
| Washing | Seat cover unzips for a gentle cold machine wash; back cushions are not machine washable |
| Stacked mattresses | Cover height = combined height; two 4.75 in layers take 9.5 to 10 in |
| Best for | White rooms, plain rentals, new builds |

## Buyer questions: washing, height, and a bed for a toddler

**A common question:** Can the daybed set covers go in the washing machine?

**The workshop's answer:** The seat cover can. Unzip it and wash it on a gentle, cold cycle. The back cushions are not machine washable.

**A common question:** I have two 4.75 in twin mattresses stacked on my Hemnes. Is an 8 in cover the right thickness?

**The workshop's answer:** Go to about 9.5 to 10 in (24 to 25 cm). Two 4.75 in (12 cm) mattresses add up to roughly 9.5 in, and a cover made for that height looks properly filled rather than loose.

**A common question:** Could you make a toddler bed cushion the size of a twin mattress?

**The workshop's answer:** For a child's bed, the workshop pointed the buyer to its separate kids' foam bed rather than a custom bench cushion.

> Two stacked 4.75 in mattresses need a Hemnes daybed cover about 9.5 to 10 in thick, not 8 in, so the cover looks filled instead of loose.
>
> — Hana

> **Tailor's margin:** Charcoal piping on a rust daybed cover is softer than black. The line frames a warm color without making it loud.

## Questions buyers ask next

### Is linen-look fabric the same as real linen?

No. Linen-look has the matte, slubbed surface of linen in a different fiber, while real linen is a natural fiber with its own feel. The simplest way to decide is to hold both swatches against the daybed in daylight.

### Why charcoal piping instead of black on a rust daybed cover?

Charcoal is a softer contrast. It outlines the mattress front and bolster ends clearly but keeps a warm rust from looking loud, which suits a bright white room, a rental or a new build.

### Can a Hemnes set have rectangular side pillows instead of round bolsters?

Yes. One buyer ordered rectangular side pillows of 12 x 30 in (30.5 x 76 cm) in place of round bolsters, alongside back cushions of 17 x 36 in (43 x 91 cm).

### Does a fitted cover get in the way of the Hemnes drawers?

It should not. A cover sized to the mattress stops above the drawer fronts, so storage below stays easy to open. Measure the mattress, not the frame, to keep it that way.

## Related at the atelier

- [Hemnes Daybed Cover in Ivory Linen-Look with Crimson Piping](https://cushionguide.com/readings/ivory-hemnes-daybed-crimson-piping-jute-rug/): To order Hemnes daybed covers right the first time, measure your own mattresses rather than trusting a listing, because Hemnes versions differ between countries.
- [Hemnes Daybed Cover for a Playroom: Orchid Pink, Ivory Piping](https://cushionguide.com/readings/orchid-pink-hemnes-daybed-kids-playroom/): For a Hemnes daybed cover in a child's room, choose a mid-tone, hard-wearing linen-look fabric and consider contrast piping in the wall color.
- [Hemnes Daybed Cover in Cream Linen-Look With Navy Piping](https://cushionguide.com/readings/cream-hemnes-daybed-cover-navy-piping-bedroom/): A cream linen-look Hemnes daybed cover with navy piping makes a narrow guest bed read as a sofa: the piping outlines the mattress, two back cushions fill the width of the frame, and a bolster at…
- [Can you add piping to tufted cushions?](https://cushionguide.com/answers/piping-on-tufted-cushions/): Piping works on some tufted cushions but not on tufted daybed backrests and armrests, so those pieces switch to a plain, non-tufted style if you want piping everywhere, and the shop sends an example…
- [Why won't my discount code work, and why did it remove the sale price?](https://cushionguide.com/answers/discount-code-not-working-sale-price/): Your discount code most likely won't work because the store sale is already built into the listing price, and the marketplace doesn't let a code stack on a running sale.
- [Do you ship custom cushions to the UK, and what does delivery cost?](https://cushionguide.com/answers/uk-delivery-custom-cushions/): Custom cushions ship to the whole UK, Scotland included, and the workshop confirms shipping cost and timing with your quote.
- [How to measure an IKEA Hemnes daybed: two stacked mattresses, one cover](https://cushionguide.com/guides/ikea-hemnes-daybed-cover-measuring/)
- [How to make a daybed look like a sofa with back cushions and bolsters](https://cushionguide.com/guides/daybed-back-cushions-sofa-look/)

*— Hana*

---

Written by Hana Lindqvist (https://cushionguide.com/masters/hana/) for CushionGuide (https://cushionguide.com/about/). The site explains made-to-measure cushions and the partner workshop makes them; measurements are in inches first. This Markdown mirrors the page at https://cushionguide.com/readings/rust-hemnes-daybed-covers-charcoal-piping-white-room/