---
title: "Sunbed Cushion in Mustard Pinstripe, Split at the Hinge"
url: "https://cushionguide.com/readings/mustard-gray-pinstripe-sunbed-cushion-villa-pool/"
section: "Readings"
author: "Callum Reid, The Weather Man of Casco Bay"
author_url: "https://cushionguide.com/masters/callum/"
published: "2026-04-13"
updated: "2026-09-24"
keywords: "sunbed cushion, chaise lounge cushion, outdoor cushions, patio cushion, custom size cushion, made to measure cushion"
---

# A mustard pinstripe sunbed cushion, and how to set a row of loungers for guests

*Teak, travertine, turquoise water. Callum reads a two-part lounger cushion and what changes when you are seating a crowd instead of yourself.*

> **The quick answer:** A sunbed cushion for a reclining lounger should be made in two sections that meet at the hinge, so the back tilts without creasing the seat. Measure each section from the hinge to its end, not one overall length. Self piping and a head-to-toe stripe, like this mustard pinstripe, keep a whole row of loungers calm.

![Mustard, cream and charcoal pinstriped two-section cushion on a teak sun lounger beside a turquoise pool](https://cushionguide.com/media/chaise-and-sunbed-cushions/mustard-gray-pinstripe-sunbed-cushion-villa-pool-1600.webp "A two-part lounger cushion in a woven mustard pinstripe, split at the hinge so the back can recline. Teak, travertine and turquoise water do the rest.")

## Two sections, one hinge, and a stripe that runs the long way

Out by a pool, the sun does most of the talking. A cushion has to hold up under it.

This one is a [sunbed cushion](https://cushionguide.com/cushions/chaise-and-sunbed-cushions/) in two pieces. The back is its own panel, the seat is another, and they meet at the lounger's hinge. Tilt the back and the seat stays flat. No crease, no bunching, every recline position covered.

The stripe runs head to toe: mustard and charcoal on a cream ground, woven in [outdoor acrylic](https://cushionguide.com/fabrics/outdoor-acrylic/). Running the long way, it stretches the lounger. The cream keeps it from looking heavy in full sun.

[Self piping](https://cushionguide.com/glossary/#self-piping) in the same pinstripe outlines the seat, so no new color lands next to the water. The cushion sits inside the teak side rails, leaving the wood visible from the side, and it is slimmer than an indoor seat, which keeps the lounger's low profile.

Mustard is the warm opposite of turquoise water. That is why the stripe glows. Pale travertine underfoot and a clipped green hedge behind finish the frame. How many loungers are you cushioning this summer, friend?

## Pinned by Callum at the poolside

Five pins: the hinged back panel, the break at the hinge, the self-piped seat edge, the teak rail and the turquoise pool.

1. **Hinged backrest section**: The back is a separate panel, so it tilts with the lounger without creasing the seat.
2. **Break at the hinge**: A clean break where the frame bends lets the cushion follow every recline position.
3. **Piped seat edge**: Self piping in the pinstripe outlines the seat without adding a new color beside the pool.
4. **Teak side rail**: The cushion sits inside the teak rails, so the timber frame stays visible from the side.
5. **Turquoise pool**: Mustard is the warm opposite of turquoise water, which is why the stripe glows here.

## Seating a crowd: four rules for a row of loungers

1. **Measure every lounger**: Frames that look alike can still differ. Measure each section of each lounger from the hinge to its end, and label them. The [sunbed cushion size guide](https://cushionguide.com/guides/chaise-lounge-sunbed-cushion-size/) shows where the tape goes.
2. **Order the set together**: One order, one fabric, one piping choice. Cushions made at the same time match side by side; a pair added next summer may not, as [dye lots](https://cushionguide.com/guides/dye-lots-matching-cushions-later/) explains.
3. **Tie them where guests get up**: Ties can go wherever you ask. Put them where the cushion wants to slide when someone swings their legs off, and add a non-slip bottom on a smooth frame.
4. **Plan for the evening**: Rain doesn't negotiate. When the party ends, stack the cushions under cover, and bring them in for the winter.

## Avocado green, harvest gold, and the swatch test

A buyer wrote in about a vintage camper. They wanted avocado green cushions, the color of the era, and couldn't judge it from photos on a screen.

The workshop pointed them to an olive green velvet and suggested two harvest gold fabrics for the piping, then sent swatch photos side by side. The buyer picked the more mustard of the two. Then they asked to see a finished cushion in that exact color, and the workshop sent a photo of one before confirming the setup.

Same lesson by a pool as in a camper. When a bold palette matters, compare body and piping swatches side by side before anyone cuts. More campers like that one live in [vintage camper and RV cushions](https://cushionguide.com/concepts/vintage-camper-and-rv-cushions/).

## Buyer questions: covered couches, outside fabric and hook-and-loop

**A common question:** My outdoor couch is always under a roof. Can you make cushions for it?

**The workshop's answer:** Yes. The workshop agreed to make two patio cushions for a covered outdoor sofa with a seat about 95.7 in wide and 31 in deep (243 x 79 cm), and offered to send pricing.

**A common question:** Can I send you my own outdoor fabric, or ask for a big-name acrylic brand?

**The workshop's answer:** No. Cushions are made only from the workshop's own fabrics, and customer-supplied fabric isn't accepted. There are close to 200 outdoor options to choose from to match what you had in mind.

**A common question:** Could you add hook-and-loop tape instead of ties to keep cushions on the frame?

**The workshop's answer:** Not at the moment; hook-and-loop isn't offered. Ties can be placed wherever you want them, and a non-slip bottom is another way to stop cushions moving.

## On the cutting table: the poolside lounger

|   |   |
|---|---|
| Cushion | Two-section sunbed cushion, back and seat split at the hinge |
| Fabric | Mustard, cream and charcoal pinstripe outdoor acrylic |
| Stripe | Runs head to toe to lengthen the lounger |
| Piping | Self piping in the pinstripe |
| Edge | Box edge, slimmer than an indoor seat |
| Frame | Slatted teak lounger with an adjustable back |
| Fit | Sits inside the teak side rails |
| Measure | Each section from the hinge to its own end |
| Best for | Pool decks and patios where several loungers sit in a row |

> A reclining sunbed cushion should be made in two sections that meet at the hinge, so the back tilts and the seat never creases.
>
> — Callum

> **Tailor's margin:** Measuring a reclining lounger: take each cushion section from the hinge to its own end, never one overall length from head to foot.

## Questions buyers ask next

### Should a sunbed cushion be one piece or two?

For a lounger with an adjustable back, two pieces that meet at the hinge work best: the back tilts freely and the seat stays flat. A one-piece cushion suits a fixed, flat lounger or a daybed.

### Which way should stripes run on a lounger cushion?

Head to toe. A stripe running the length of the lounger makes it look longer and calmer, and the pattern keeps its line across both sections when the back is raised or lowered.

### What piping looks best on a poolside cushion?

Self piping in the cushion's own fabric outlines the seat without adding another color beside bright water. Contrast piping works too, but compare the two swatches side by side in daylight before ordering.

### How do I keep outdoor lounger cushions from blowing away?

Ask for ties at the exact positions your frame needs, and consider a non-slip bottom. In a storm or overnight, stack the cushions somewhere dry; no tie beats bringing them inside.

## Related at the atelier

- [Sunbed Cushion in Mustard Kilim for a Desert Yard: 5 Mistakes](https://cushionguide.com/readings/mustard-kilim-lounger-cushion-stock-tank-desert-garden/): A sunbed cushion for a gravel or desert yard should be a warm, earthy color such as mustard, not white, which shows dust within a day.
- [Sunbed Cushions: Orange Solid and Pinstripe Pair by a Pool](https://cushionguide.com/readings/orange-and-pinstripe-lounger-cushion-pair-travertine-pool/): Two sunbed cushions can wear different fabrics and still read as a pair if one color runs through both.
- [Sunbed Cushion in Cobalt Palm Print, and the Props Around It](https://cushionguide.com/readings/cobalt-palm-print-sun-lounger-cushion-sea-terrace/): A patterned sunbed cushion looks at home when its two colors come from the setting: one from the view, one from the walls.
- [Measuring a chaise lounge or sunbed cushion, hinge point included](https://cushionguide.com/guides/chaise-lounge-sunbed-cushion-size/): Measure a chaise lounge cushion by its overall length and width, then foot to hinge, so the cushion bends with the frame.
- [Cushions for Florida and the Gulf Coast](https://cushionguide.com/places/florida-gulf-coast-cushions/): Outdoor cushions in Florida need UV-resistant, water-repellent outdoor fabric, a plain non-tufted foam build and zip-off covers, plus a plan to bring them inside before storms.
- [Outdoor cushions for Spanish patios, terraces and roof decks](https://cushionguide.com/places/custom-cushions-spain/): Outdoor cushions in Spain need UV-resistant, water-repellent outdoor fabric and a shady place to rest at midday, because Seville averages 97°F (36.3°C) July highs and about 3,089 hours of sun a year.
- [How to order a custom cushion size that isn't in the size menu](https://cushionguide.com/guides/custom-size-cushion-not-on-menu/)

*Fair winds — Callum*

---

Written by Callum Reid (https://cushionguide.com/masters/callum/) for CushionGuide (https://cushionguide.com/about/). The site explains made-to-measure cushions and the partner workshop makes them; measurements are in inches first. This Markdown mirrors the page at https://cushionguide.com/readings/mustard-gray-pinstripe-sunbed-cushion-villa-pool/
